Slotted Pipes
The controlling technique of the slotted pipes and the software are chosen according to the parameters of the pipes; When the pipes are slotted, the procedure including:
pipe surface treatment before process,cooling and eliminating the heat during the whole slotting as well as removing the iron rust and oxide; after the pipes are slotted,
quality inspection is done, unqualifies pipes are sent to waste collection station; marking the qualified pipes; material certificate is issued and the finished pipes are delivered.
Specifications The slot can be up to 0.10mm; The cutting thickness of carbon steel is up to 20mm; The cutting thickness of stainless steel is up to 10mm.
Features of Slotted Pipes 1. Our slotted pipes use API J55/K55/N80 Casing and tubing. With strong overall strength, the slotted pipes are easy to deform. 2. The edge of the slot is vertical and smooth without burrs, the slot is uniform. 3. The slotted pipes control sand better, which are suitable for the well with sand diameter more than 0. 3mm. 4. The slot can be longitudinal and vertical and the section of the slot can be parallel and trapezoid types, which creates wide open area. 5. Easy to operate and to be connected with larger inner diameter.
